Corrugated & box plant glossary
Plain-language definitions of the terms used in corrugated box manufacturing, strength testing and box plant software. Use this page as a quick reference.
Corrugated materials
- Flute
- The wavy middle layer of corrugated board that gives it strength and cushioning.
- A-Flute
- A tall flute (about 4.5–5 mm) for heavy items and high stacking strength.
- B-Flute
- A short flute (about 2.5–3 mm) with good printing and die-cutting performance.
- C-Flute
- A medium flute (about 3.5–4 mm), a common general-purpose choice.
- E-Flute
- A thin flute (about 1.5 mm) for retail and slim-profile packaging.
- F-Flute
- A very fine flute for premium, high-quality print packaging.
- BC-Flute
- A double-wall combination of B and C flutes for heavy-duty and export boxes.
- Liner
- The flat outer or inner layer of corrugated board, usually measured in GSM.
- Medium
- The paper used to form the corrugated flute between liners.
- GSM
- Grams per square metre — the weight (density) of paper.
- BF (Bursting Factor)
- A measure of paper strength used in burst-strength calculations.
- 3-ply / 5-ply / 7-ply
- The number of paper layers in the board; more ply means more strength.
Strength tests
- BCT (Box Compression Test)
- The maximum top-load a finished box can bear before collapsing.
- ECT (Edge Crush Test)
- The strength of the board's edge; used to estimate box compression strength.
- RCT (Ring Crush Test)
- The compression strength of a paper ring, reflecting the paper's contribution to box strength.
- Keyline
- The technical drawing that defines a box's cut, crease and fold lines.
Manufacturing & planning
- Deckle
- The usable width of a corrugator, which affects how jobs are combined.
- Trim waste
- Material lost when a job does not use the full deckle width.
- RSC (Regular Slotted Container)
- The most common box style, with equal-length top and bottom flaps.
- Paper optimisation
- Choosing the lowest-cost paper combination that still meets required strength.
- BOM (Bill of Materials)
- The list of materials and quantities needed to make a product.
- MRP (Material Requirements Planning)
- Calculating what to buy and when, based on orders, stock and lead times.
- Job card
- The production document that authorises and tracks a manufacturing job.
- GRN (Goods Receipt Note)
- The record created when purchased material is received into stock.
- POD (Proof of Delivery)
- Evidence that a dispatched order was delivered to the customer.
- Dispatch challan
- The document that accompanies goods leaving the plant.
Business
- Working capital
- Cash tied up in stock and operations; reducing inventory frees it up.
- Slow-moving stock
- Inventory that has not been used for a long time and ties up cash.
- Corrugated ERP
- Software that runs a box plant end to end, from inquiry to dispatch.
PackWares puts these in one platform — explore the product or see pricing.